Safe Box - K2-860ZW with fingerprint in Gadgets | Bravo

Safe Box - K2-860ZW with fingerprint

Manual of single fingerprint electronic lock First opening 1. Install 4.5 X batteries into the emergency power bos, pay attention to the battery"+". 2. Insert the plug of the emergency power box into the emergency parer hole of the panel to power on the system. 3. Put any finger in the fingerprint acquisition window to complete Ingerprint acquisition and unlock, and voice prompts "the door lock has been opened". At this time, you can turn the main key or handle to apen the door. After the electromagnet drives for 75, the electromagnet will automatically rebound and reset. 4. Please complete all door opening actions within 7 seconds (considering the safety factor of electronic lock). After opening the door, put the battery into the battery box of the back cover of the door panel for the convenience of next use. Tip: users should use alkaline iron shell bettery in long-term use to increase the service life of electronic system! Add fingerprints Any fingerprint can be unlocked when leaving the factory, in order to use safely, picase set the fingerprint first. 1. After opening the door, press the setting key once, the arquisition window light will be on, the voice prompt "please press the finger" will put the finger on the acquisition window, the green light will flash to collect the fingerprint and then turn off, the finger will leave, and the voice prompt "fingerprint configuration is successful", indicating that the setting is successful. 2. If the voice prompts "fingerprint configuration failed" and the error indicator is on, please operate again. 3. Set different finger fingerprints according to the method (step 1). 4. This product can add up to 60 effective fingerprints. Delete fingerprints Long press the "setting key" for more than 3 seconds, and the voice prompt "system initialization succeeded" indicates that the factory status is restored. Precautions for setting and use 1. When pressing the fingerprint, please put the finger on the fingerprint acquisition window (as shown in the above figure) according to the correct method, and automatically complete the fingerprint acquisition. The green light flashes and the voice prompts "the door lock has been opened", and then the door can be opened. Entering the wrong fingerprint voice will prompt "verification failed". 2. Keep fingers clean and moist. Too dry or worn fingerprints can lead to fingerprint recognition failure. The correct method is shown in the figure above: In order to improve the success rate of unpacking, each user should log in at least two fingerprints that are not the same hand. If the fingers are dry (the cuticle of the finger skin lacks moisture and grease), moisten the fingers first to improve the success rate of unpacking. If there is no fingerprint or fingerprint fracture, and engaged in heavy physical work (the skin of the finger is greatly worn), and the skin of the finger is defective (scratches, burns, scars, diseases, etc.), the above-mentioned people should not use the fingerprint. The finger lines of women are thin, shallow, delicate, and sometimes need to be input several times to open the box (cabinet); the little thumb of women and some children under the age of 7 have the phenomenon of recognition difficulty. The fingerprints of people under 16 years old and over 60 years old change with age. It is recommended to re register every six months to ensure the success rate of opening Vibration alarm 1. In the unlocking state, press the setting key briefly, and the voice prompt "vibration warning is on" will automatically enter the vibration warning state. 2. After entering the warning state and standby state, if the sale encounters vibration, it will generate vibration alarm. The alarm horm will process, input the correct fingerprint, release the alarm and open the door. sound for 20 seconds. During the alarm 3. After the fingerprint door is opened, the vibration alarm function will be automatically cancelled, and the vibration alarm needs to be turned on again Fingerprint invalid alarm if the fingerprint identification is wrong 3 times, the horn alarm will be sent out, and the alarm can be released by inputting the correct fingerprint unlocking. Low pressure alarm When the power supply voltage is lower than 4.5V, the voice will prompt "please replace the battery in time when the battery voltage is low" when the electromagnet is driven, and the low-voltage alarm indicator will be on. Below 4.0V, the system will not work property. (please replace the battery)

, ,

USD250.00

( 0 Reviews )